Oxfordshire · England
Bathroom Resealing in Marston
Professional bathroom resealing in and around Marston, with old sealant always removed completely and a 12-month guarantee.
- Splits where the tray meets the wall
- Water escaping at the shower enclosure
- Black mould in the silicone that will not clean off
How we handle bathroom resealing in Marston
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you have cracked, shrunken or lifting silicone and black spots spreading through the bead, we can help.
Around Marston, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months.
- Location
- Marston (OX3, OX2)
- Region
- Oxfordshire
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
FAQs for Marston
Do you work for landlords with property near Oxford station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Do you work for hotels and guest houses in Marston?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or email us and tell us what needs doing and where.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it usually can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
When to call us in Marston
The wrong product fails fast. Acrylic caulk and general-purpose sealants are not designed for a joint that’s wet every day, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
If you can see any of these, it’s time to have the joints looked at:
- Shrunken sealant along the back of a worktop
- Damp behind the bath or under the tray
- A bead that has pulled away from the tiles
- A joint torn by a bath that flexes
If you let a flat or house near Oxford station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- How the surfaces are prepared before sealing
- Are they insured?
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
Looking after it afterwards
So the new joints stay in good condition:
- Keep scourers and sharp tools away from the bead
- Don’t let bottles sit on the bead
- Open a window or run the fan so the room dries
- Dry the bead with a towel now and then
Do not stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually will not remove it, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.
Landlords, agents and businesses in Marston
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes around two hours for one bath or shower, longer for a whole bathroom and we leave things clean and tidy. Somewhere as small as Marston, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Before we arrive
- Move anything stored near the joints
- Where the joints are inside, avoid wetting them before we arrive
- On commercial sites, let us know about site rules
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Advice
Bathroom resealing in Marston: local notes
Marston has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as Church of St Nicholas, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Schools such as St Nicholas Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Marston is about 2 miles north of Oxford, in Oxfordshire. If you need bathroom resealing in Marston, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Oxfordshire. 443 places in Oxfordshire are on our list, large and small.
Every address in OX3 and OX2 is covered for bathroom resealing, from the main roads to the quietest streets. Streets in the area include Back Lane, Mill Lane and Butts Lane, and we cover them all. Neighbouring places we cover for bathroom resealing include Northway (1 mile south-east), New Marston (1 mile south), Norham Manor (1 mile south-west), Summertown (1 mile west) and North Oxford (1 mile west). Within a short drive, we also cover Didcot (12 miles south), Bicester (9 miles north), Abingdon-on-Thames (7 miles south), Witney (11 miles west), Carterton (15 miles west) and Thame (12 miles east).
Around Marston
Locally, jobs take us to homes and businesses close to Oxford University Parks, Oxford Academy and Swan School, among other places. Nearby too are Victoria Arms (0.5 miles west) and St Hugh's College Main Building Including Library (1.3 miles south-west). For rail, the closest station is Oxford station, roughly 2.2 miles south-west of the centre. Well-known places in the area include Pitt Rivers Museum (1.5 miles south-west) and Oxford Castle (2.1 miles south-west). For a walk, there’s Headington Hill and Hook Meadow and The Trap Grounds.
What affects the cost of bathroom resealing
Jobs vary more than people expect. The main factors:
- Whether old sealant or filler has to be cut out
- The type of sealant required
- How easy the joints are to reach
- The number of rooms or windows
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
- Whether it’s a home or a business
For bathroom resealing in Marston, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
What we can’t put right
A few problems are outside what sealant work can do:
- Water getting in through the grout rather than the sealant
- Water coming from the plumbing rather than the joint
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
Towns and villages near Marston
What else we do in Marston
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.