Brighton and Hove · England
Bathroom Resealing in Saltdean
Problem with your baths, showers and worktops in Saltdean? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Leaking joints on a shower screen
- Two layers of silicone, both failing
- Water getting behind the kitchen upstand
Bathroom resealing around Saltdean
Saltdean is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Southease station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Homes close to St Nicholas include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. For site and facilities teams at buildings such as Saltdean Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Saltdean is about 1 mile west of Telscombe, in Brighton and Hove. Anywhere in BN2, we can carry out bathroom resealing at your property. Across Brighton and Hove, we cover 30 places, Saltdean among them.
Jobs for bathroom resealing in BN2 is quoted and booked the same way as anywhere else. Whether your property is on Hill Road, School Lane and Lynwood Road or anywhere close by, we can help. Neighbouring places we cover for bathroom resealing include East Saltdean (1 mile east), Rottingdean (1 mile north-west), Telscombe (1 mile east), Ovingdean (2 miles north-west) and Roedean (3 miles west). Within a short drive, we also cover Brighton (4 miles north-west), Brighton and Hove (7 miles west), Hove (6 miles west), Carlton Hill (4 miles west), Hanover (4 miles north-west) and West Hill (5 miles west).
Local landmarks in Saltdean
Around Saltdean, our work takes us to homes and buildings near Beacon Hill, Queen Victoria pub and Longhill High School and the streets around them. The nearest railway station is Southease station, roughly 3.7 miles north-east of the centre. Nearby you will also find French Convalescent Home (3 miles west) and Brighton Motor Museum (3.5 miles west). Green spaces nearby include Beacon Hill Local Nature Reserve and Newmarket Hill.
About our bathroom resealing in Saltdean
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Saltdean. We are ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. If you have a reseal done over the top of the old bead and leaking joints on a shower screen, we can put it right.
Even in a smaller place like Saltdean, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
Each job carries a 12-month guarantee.
- Place
- Saltdean (BN2)
- Region
- Brighton and Hove
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlords, agents and businesses in Saltdean
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we are fully insured for the work.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Also near Saltdean
Other services in Saltdean
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
How to look after the new joints
Looking after new joints is easy:
- Clean with a mild bathroom cleaner and a soft cloth
- Keep the fan on for a while after bathing
- Keep an eye on the corners, where splits start
- Dry worktop joints after washing up
Wipe up standing water along the worktop joint. The drier the joint stays, the longer it lasts.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
Why it’s worth doing now in Saltdean
Bleach and mould sprays may lighten black marks for a while, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. Homes in smaller places like Saltdean can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Call for a quick quote and we will explain what it covers.
Why book with us
- More than 20 years in sealant work
- Colour agreed with you before we start
- ARBOMaster approved applicator
- Tidy, careful work
See what affects the cost and our reviews.
What the job involves on each surface
Shower trays & enclosures
There are normally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both get soaked every time the shower runs, so both are resealed with anti-fungal sanitary silicone.
Baths
Baths move more than any other fitting, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest.
Saltdean: your questions answered
Do you cover smaller places like Saltdean?
Yes. Saltdean is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for hotels and guest houses in Saltdean?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Quotes for bathroom resealing in Saltdean
You’ll get a clear quote before work begins. It’s based on:
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- Any working-time requirements on site
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Asking for a quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or drop us an email.
How it works
Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes half a day or less for one room, longer when the kitchen is included. Parking around Saltdean is normally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.