Brighton and Hove · England

Bathroom Resealing in Brighton and Hove

Bathroom resealing for Brighton and Hove and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Water getting behind the kitchen upstand
  • Black mould in the silicone that won’t clean off
  • A reseal done over the top of the old bead

Bathroom resealing for Brighton and Hove homes and businesses

How the visit works

At the end, we look at the finished work together and explain the cure time. The visit itself usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen, depending on the size of the job. For a job in Brighton and Hove, we need access to where the work is and somewhere nearby to park. For outside work, let us know about side access, gates and any upper-floor joints.

  1. We protect the area and cut out all of the old sealant, including the film left on the tiles.
  2. Next, the joint is cleaned and any mould is treated.
  3. Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. We tidy up and give you the cure time, usually around 24 hours.

Preparing for the visit

  • Clear the area around the work
  • Plan for the work area to be out of bounds to pets and children
  • Mention any sign-in or site rules at work premises

Get a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or email us.

Get a price

Related advice

About our bathroom resealing in Brighton and Hove

Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We’re often asked to deal with black spots spreading through the bead and damp behind the bath or under the tray, on sinks & splashbacks, baths and kitchen worktops & upstands.

Homes around Brighton and Hove have been extended and refitted over the decades. Sealant run over the top of an old bead is a common cause of leaks and mould, which is why all the old material has to come out first.

Big or small, you get the same one-year guarantee.

Location
Brighton and Hove (BN3, BN41, BN1)
Wider area
Brighton and Hove
Guarantee
A year, on every job
Quote
A clear quote up front
Phone
0345 464 0079
Updated
26 October 2026
Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles

Why act early in Brighton and Hove

Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect. Around Brighton and Hove, failed sealant lets water into hidden places, like the floor under a bath, the back of a panel or the inside of a wall. Left alone, that means rot, damp and a bigger repair.

The cost reflects the work involved, not guesswork. That’s why we ask about the job first and give you a clear price before work begins.

Why Brighton and Hove clients choose us

  • Homes, businesses and hotels
  • Rated 4.9 stars on Google
  • A 12-month guarantee on all work
  • We leave the area clean and tidy

See what affects the cost or our reviews.

What we can’t put right

Some problems need a builder, plumber or other trade rather than us:

  • A cracked shower tray or bath (that needs repair or replacement)
  • Movement from a bath with loose feet or no proper support
  • Damage behind the tiles that needs a tiler

Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.

What we seal

  • Sinks & splashbacks
  • Wet rooms
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & upstands

Bathroom resealing around Brighton and Hove

Brighton and Hove is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Brighton and Hove has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.

Homes close to Holy Cross Church include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Aldrington station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.

Brighton and Hove is in England. We carry out bathroom resealing for homes and businesses in Brighton and Hove and nearby. We cover 30 towns and villages across Brighton and Hove, large and small.

We work across BN3, BN41 and BN1 for bathroom resealing and the streets around it. Whether your property is on New Church Road, Princes Square and Station Road or anywhere close by, we can help. Main roads around Brighton and Hove include the A270 and A293, so getting to you is simple. Close by, we work in Aldrington (1 mile south-west), West Blatchington (1 mile north-east), Hove (1 mile south-east), Prestonville (2 miles east) and Brunswick (2 miles south-east). Larger places within reach include Brighton (3 miles east), Carlton Hill (3 miles east), Hanover (3 miles east), Kemptown (3 miles south-east), Hollingdean (3 miles east) and Whitehawk (4 miles east).

Landmarks near Brighton and Hove

Around Brighton and Hove, our work takes us to homes and buildings near Hove Park, The Drive Prep School and Hove Park School and the streets around them. There’s a railway station in Brighton and Hove itself: Aldrington station. Nearby you’ll also find British Engineerium (0.7 miles north-east) and Churchill Square (2.1 miles south-east). Open spaces near Brighton and Hove include Thundersbarrow Hill and Ladies Mile.

Map of Brighton and Hove © OpenStreetMap contributors

Common problems we fix in Brighton and Hove

Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and mould that has grown into the silicone generally won’t clean off.

People usually contact us when they notice one of these:

  • Sealant that has split, shrunk or peeled away
  • Water getting behind the bath panel
  • Black mould in the silicone that will not clean off
  • Lumpy, uneven sealant from a DIY attempt

Managing a site like West Hove Infant School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

What to look for in a quote

  • When the joint can take water or movement
  • How the joint is cleaned and prepared
  • Which colour the sealant will be
  • Is VAT in the price?

10 questions to ask before you book

Can I do it myself?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

Surface by surface

Wet rooms

A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.

Sinks & splashbacks

Around the sink, we use a product suited to kitchens, and a food-safe product where it’s needed. The joint is laid neatly so it’s easy to wipe.

Brighton and Hove: your questions answered

Do you work for hotels and guest houses in Brighton and Hove?

Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.

I let a flat near Aldrington station. Can you help?

Yes, we work for landlords and agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.

Will it make a mess?

No. The area is protected while we work and cleaned up afterwards.

Do you take out the old sealant first?

Yes. We cut out all the old sealant and clean the joint before resealing.

Do you cover Brighton and Hove?

Yes. From our base in Crawley, we cover South East England, London and all of Scotland, Brighton and Hove included.

Do you reseal kitchen worktops and sinks too?

Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.

Can you get rid of the black mould in my sealant?

Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.

Is it OK to put new sealant on top of the old bead?

No. Fresh silicone cannot stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.

Landlords, agents and businesses in Brighton and Hove

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.

Letting agents and landlords in Brighton and Hove can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job