Brighton and Hove · England
East Saltdean Bathroom Resealing
Problem with your baths, showers and worktops in East Saltdean? We cut out the old, prepare the joints and apply the right sealant.
- Water getting behind the bath panel
- Leaking joints on a shower screen
- Gaps where the bath or tray has moved
Aftercare tips
To keep the joints looking good and working properly:
- Open a window or run the fan so the room dries
- Keep an eye on the corners, where splits start
- Dry worktop joints after washing up
- Dry the bead with a towel now and then
Do not stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning normally will not remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Bathroom resealing for homes and businesses in East Saltdean
We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the new joint isn’t pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. If you have mouldy sealant that has gone black and two layers of silicone, both failing, we can put it right.
In a smaller place like East Saltdean, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
All our work comes with a one-year guarantee.
- Location
- East Saltdean (BN2)
- Region
- Brighton and Hove
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
If you manage several properties in or around East Saltdean, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
Bathroom resealing in East Saltdean: local notes
East Saltdean is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Southease station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you live in an older home near St Nicholas, walls and floors in older homes can move, and sealant and grout show it first.
East Saltdean is about 4 miles west of Newhaven, in Brighton and Hove. Wherever you are in the BN2 postcode area, our applicators can take on bathroom resealing. East Saltdean is one of 30 places in Brighton and Hove where we work for bathroom resealing.
Here we cover the BN2 postcode area for bathroom resealing. Streets in the area include Wicklands Avenue, Oaklands Avenue and Brambletyne Avenue. If you’re just outside East Saltdean, we cover Saltdean (1 mile west), Telscombe (1 mile east), Rottingdean (2 miles north-west), Ovingdean (2 miles north-west) and Rodmell (3 miles north-east). We also work in nearby towns such as Brighton (5 miles north-west), Brighton and Hove (7 miles west), Hove (7 miles west), Carlton Hill (5 miles west), Hanover (5 miles north-west) and West Hill (5 miles west).
Local landmarks in East Saltdean
Around East Saltdean, our work takes us to homes and buildings near Beacon Hill, Smugglers Rest pub and Peacehaven Community School, among other places. For rail, the closest station is Southease station, roughly 3.3 miles north-east. Nearby you will also find French Convalescent Home (3.5 miles west) and Planet Earth Museum (3.7 miles east). Green spaces nearby include Newmarket Hill and Beacon Hill Local Nature Reserve.
How it works
On the day, we start by going over the job with you. Surfaces next to the work are protected before any work begins. The work normally takes a morning or an afternoon for most single baths and showers. In a smaller place like East Saltdean, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Mention any parking rules near the property
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
How to get a quote
For bathroom resealing in East Saltdean, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before work begins.
Read more
Also near East Saltdean
More services for East Saltdean
How the job changes by surface
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
When something else is needed
We won’t take on work that will not last, so these are the limits:
- Damage behind the tiles that needs a tiler
- Failed grout lines across the wall
- A leaking waste, trap or valve
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
What we’re called out for in East Saltdean
Baths and trays move. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
If you can see any of these, it’s time to have the joints looked at:
- A bead that has pulled away from the tiles
- Splits where the tray meets the wall
- Leaks into the floor or ceiling below
- Mouldy sealant that has gone black
If you look after a building such as Saltdean Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before booking anyone
- When the joint can take water or movement
- How much experience the applicator has
- Which sealant they’ll use, and why
- Whether you can choose the colour
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- The type of sealant required
- The size of the job
- Access and height
- Working hours on commercial sites
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What we need to know
Before you ask for a quote, have a think about:
- The rough size of the job
- What’s wrong with the joints now
- Whether it’s a home or a business
- Where the job is, and your postcode
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Questions from East Saltdean
Will you come out to East Saltdean?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Southease station?
Yes. We work for letting agents and landlords as well as householders, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A whole bathroom plus the kitchen may take most of the day.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Can you get rid of the black mould in my sealant?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.