Aberdeen · Scotland
Bathroom Resealing in Donside Village
Bath, shower, basin, wet room, worktop and sink resealing in Donside Village, with a 12-month guarantee on every job. Ask us for a quote.
- Splits where the tray meets the wall
- Leaking joints on a shower screen
- A messy, uneven bead from a previous reseal
Different surfaces, different methods
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
About our bathroom resealing in Donside Village
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. We are often asked to deal with mouldy sealant that has gone black and gaps where the bath or tray has moved, on kitchen worktops & upstands, basins & vanity units and sinks & splashbacks.
Stone-built tenements are part of every Scottish city, alongside houses and newer flats. With flats above and below, a leak from a tired seal can reach the flat underneath.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Location
- Donside Village (AB24, AB22, AB23)
- Wider area
- Aberdeen
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Donside Village homes and their sealant
Donside Village is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. There are hotels and other places to stay in and around Donside Village. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
Managing a site like St Machar Academy? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Rented homes near Aberdeen station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near St Joseph's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Donside Village is about 1 mile north of Aberdeen, in Aberdeen. For bathroom resealing in and around Donside Village, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Aberdeen. Our area takes in 63 places across Aberdeen, from the larger towns to small villages.
All of AB24, AB22 and AB23 is within our area for bathroom resealing. That includes homes and businesses on Gort Road, Hayton Road and Tedder Road. We also cover Tillydrone (1 mile south-west), Danestone (1 mile north-west), Berryden (1 mile south), Cornhill (1 mile south-west) and Aberdeen (1 mile south). We also work in nearby towns such as Ferryhill (3 miles south), Dyce (4 miles north-west), Portlethen (8 miles south), Cults (5 miles south-west), Braeside (3 miles south-west) and Cove Bay (5 miles south).
Local landmarks in Donside Village
We work in homes and buildings around Bridge of Don Academy, Library and St Peter's RC Primary School, among other places. You’ll also find Seaton Park (within half a mile south-east) and 97 High Street pub (0.7 miles south-east). The nearest railway station is Aberdeen station, about 2.3 miles south of the centre. Well-known places in the area include Bishop Dunbar's Hospital (less than half a mile south-east) and Bon Accord Centre (1.8 miles south). For a walk, there’s Gallows Hill and Rubislaw Quarry.
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The process
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes around two hours for one bath or shower, longer for a whole bathroom. Inside a flat in Donside Village, the job is planned with you; outside, shared parts may need the factor or other owners involved. It helps to know which it is when you get in touch.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Read more
For landlords and businesses
For anyone letting property in or around Donside Village, several properties can go on one quote. Just tell us the addresses and what each one needs.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
FAQs for Donside Village
Can a failed shower seal in a tenement flat in Donside Village leak into the flat below?
Yes, it can. In a tenement, water that gets past failed sealant or cracked grout can run under the bath or tray and through to the ceiling below, and then the repair involves your neighbours too. It’s worth sorting sealant and grout before it gets that far.
Do you work for landlords with property near Aberdeen station?
Yes. We work for landlords and letting agents as well as householders. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
How long does it take to reseal a bath or shower?
Allow a morning or an afternoon for most single baths and showers. You’ll know how long to expect before any work starts.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Do you work in Donside Village?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland, and that includes Donside Village.
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Tiles that have come away from the wall
- Cracks in the tray itself rather than the joint
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
What affects the quote in Donside Village
The quote reflects the job in front of us. We look at:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- The product the joint needs
- How many areas need sealing
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please email us at info@mrmastic.co.uk and we will talk you through it.
What we need to know
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- A few pictures by email, if you can
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Why it’s worth doing now in Donside Village
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is normally all it takes, provided the bath, tray and tiles are in good order. If we find a deeper problem, you will hear it from us. In a tenement flat in Donside Village, a failed seal is rarely just your problem: water can reach the flat below, and gaps in shared walls or fire-stopping affect the whole stair.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- 4.9 on Google from 180+ five-star reviews
- Trusted Arbo and Everbuild sealants
- White, clear, grey or coloured to suit, where the product allows
- ARBOMaster approved applicator
See our cost guide and what customers say.