Aberdeen · Scotland
Bathroom Resealing in Dyce
Specialist bathroom resealing for Dyce: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Cracked, shrunken or lifting silicone
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
What the job involves on each surface
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that is needed. The joint is laid neatly so it’s easy to wipe.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. If water gets in, the cabinet underneath can swell, so a neat, continuous bead matters.
About our bathroom resealing in Dyce
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. If you have black mould in the silicone that won’t clean off and two layers of silicone, both failing, we can put it right, whatever the surface.
In Scotland’s cities, including the area around Dyce, many older flats had their bathrooms added into small rooms later on. Rooms like that are often small and slow to dry out, which is hard on sealant and grout.
You are covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Location
- Dyce (AB21, AB22)
- Wider area
- Aberdeen
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Do you need bathroom resealing in Dyce?
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
It’s worth asking for a quote if you see:
- Mouldy sealant that has gone black
- Failed sealant on the screen profile
- Water getting behind the kitchen upstand
- A messy, uneven bead from a previous reseal
Letting a property close to Dyce station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Comparing quotes
- What happens if they find a problem under the old sealant
- Whether VAT is included
- When the joint can take water or movement
- What product goes in the joint
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Dyce and across Aberdeen. Several sites can be quoted together, and we’re fully insured.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
What we do, step by step
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and clear up. It usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a city area like Dyce, parking may be by permit or pay-and-display, so tell us what’s nearby. If you are in a flat, let us know how we get in at the street door.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, generally around 24 hours.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
Getting a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Advice
Leave it or put it right?
Dealing with sealant early is a short job: the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Scottish rain finds any gap around a frame or wall joint, and in a tall building in Dyce, damp can travel a long way before it shows.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- Homes, businesses and hotels
- Sealant colour chosen to suit
- White, clear, grey or another colour, product permitting
- A 12-month guarantee on all work
See what affects the cost and our reviews.
FAQs for Dyce
Can a failed shower seal in a tenement flat in Dyce leak into the flat below?
Yes, it can. In a tenement, water that gets past failed sealant or cracked grout can run under the bath or tray and through to the ceiling below. Replacing tired sealant early is the simplest way to avoid that.
Do you work for hotels and guest houses in Dyce?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do you guarantee your resealing?
Yes. Our one-year guarantee covers every job, and we are ARBOMaster approved applicators.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can mouldy silicone be sorted out?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Do you work in Dyce?
Yes, we do. Our applicators work in Dyce, and the service is the same as everywhere else.
What bathroom resealing looks like in Dyce
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Aberdeen is known for its granite tenements, and in a tenement, a failed seal can reach the flat below.
If you look after a building such as Dyce Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Dyce is about 4 miles north-west of Aberdeen, in Aberdeen. Across the AB21 area, our applicators can take on bathroom resealing. Our area takes in 63 places across Aberdeen, from the larger towns to small villages.
Our applicators cover all of the AB21 and AB22 postcode area for bathroom resealing. That includes homes and businesses on Glen Road, Argyll Road and Walton Road. You will find Dyce on the A947, which makes it straightforward to reach with everything needed for bathroom resealing. We also cover Stoneywood (1 mile south), Newhills (2 miles south), Bucksburn (2 miles south), Corsehill (2 miles north-east) and Danestone (3 miles south-east). Larger places within reach include Aberdeen (4 miles south-east), Rosemount (5 miles south-east), Berryden (4 miles south-east), Ferryhill (6 miles south-east), New Aberdeen (5 miles south-east) and Tillydrone (4 miles south-east). Being one of Aberdeen’s larger places, Dyce has homes, rented property and businesses of every kind.
Near you in Dyce
There’s a railway station in Dyce itself: Dyce station. A little further out are Woodend Hospital (3.8 miles south). Green spaces nearby include Badgers' Hill and Corby Loch.
More services for Dyce
What affects the cost of bathroom resealing
We quote each job individually. These are the things that affect it:
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- How easy the joints are to reach
- Whether there’s mould to deal with
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please email us at info@mrmastic.co.uk.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Roughly how big the job is
- Photos by email, if that is easy
- Whether it’s a home or a business
- Whether it has been sealed before
Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job.