Southampton · England
Freemantle Bathroom Resealing
Specialist bathroom resealing for Freemantle: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Leaks into the floor or ceiling below
- Black spots spreading through the bead
- A messy, uneven bead from a previous reseal
Bathroom resealing in Freemantle, done properly
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We work on baths, shower trays & enclosures and sinks & splashbacks, and people most often call us about sealant that has split, shrunk or peeled away and shrunken sealant along the back of a worktop.
Even in a smaller place like Freemantle, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Freemantle (SO15, SO16, SO17)
- Wider area
- Southampton
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Bathroom resealing around Freemantle
Freemantle is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
In the older streets around Christ Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Millbrook (Hants) station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. For site and facilities teams at buildings such as Freemantle Church of England Community Academy, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Freemantle is about 1 mile west of Southampton, in Southampton. Our applicators cover bathroom resealing for householders, landlords and businesses in Freemantle, as part of our work across Southampton. Freemantle is one of 40 places in Southampton where we work.
Work in SO15, SO16 and SO17 works the same way as everywhere else we cover. You will find streets such as May Road, Park Road and Pitt Road, and we cover them all. With the A33 close by, Freemantle is simple for us to get to. Other places close to Freemantle include Shirley (1 mile north), Regents Park (1 mile north-west), Millbrook (1 mile west), Maybush (2 miles north-west) and Coxford (2 miles north-west). Larger places within reach include Townhill Park (3 miles north-east), Midanbury (3 miles east), Thornhill (4 miles east), Chartwell Green (4 miles east), Harefield (4 miles east) and Itchen (3 miles east).
What’s near Freemantle
Locally, jobs take us to homes and businesses close to St Anne's Catholic School, Blechynden Terrace Park and The Brass Monkey pub. Freemantle has its own railway station: Millbrook (Hants) station. Nearby you’ll also find Western Community Hospital (1.3 miles north-west) and Foresters Museum & Archive (within half a mile east). The countryside around Freemantle includes Testwood Lakes.
Nearby places to Freemantle
Other services in Freemantle
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Look for lifting corners and small gaps now and then
- Keep the fan on for a while after bathing
- Wait for the cure time we give you
- Avoid abrasive pads on the sealant
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning generally won’t remove it. Replacing the sealant early keeps the job small.
Landlord and commercial work in Freemantle
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
For anyone letting property in or around Freemantle, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Loose or hollow tiles, or failed tanking behind them
- A tray or bath that is cracked through
- Water coming from the plumbing rather than the joint
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Freemantle
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
The process
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes two to three hours for a typical bath, depending on how much old sealant there is. For a job in Freemantle, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We protect the area and cut out all of the old sealant.
- The joint is cleaned, degreased and treated for mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, usually around 24 hours.
How to prepare
- Clear items away from the joints we’re working on
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
Get a quote
Want a quote for bathroom resealing? Please call 0345 464 0079 or send us an email with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Different surfaces, different methods
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
Shower trays & enclosures
There are generally two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so both are resealed with anti-fungal sanitary silicone.
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
FAQs for Freemantle
Do you work for hotels and guest houses in Freemantle?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is Freemantle within the area you cover?
Yes. Freemantle is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Can mouldy silicone be sorted out?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you will get one quote.
How long does the new silicone need before I use the shower?
Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or as long as we advise for that product.
How long will the resealing take?
It takes two to three hours for a typical bath, depending on how much old sealant there is. We will confirm how long your job needs when we quote.
Leave it or put it right?
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. In an older home around Freemantle, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why book with us
- 20+ years of sealant experience
- Anti-fungal silicone where joints get wet
- Approved under the ARBOMaster scheme
- Trusted Arbo and Everbuild sealants