Portsmouth · England
Tipner Bathroom Resealing
We cover Tipner for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Sealant that has split, shrunk or peeled away
- Failed sealant on the screen profile
- A reseal done over the top of the old bead
How we handle bathroom resealing in Tipner
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the new joint isn’t pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. If you have sealant that has split, shrunk or peeled away and lumpy, uneven sealant from a DIY attempt, we can help.
In a smaller place like Tipner, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Tipner (PO2)
- Region
- Portsmouth
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Bathroom resealing around Tipner
Tipner is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Stamshaw Infant Academy are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Portsmouth & Southsea station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. If you live in an older home near St Saviour's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Tipner is about 1 mile north-west of Portsmouth, in Portsmouth. Every kind of property in Tipner is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Tipner is one of 19 places in Portsmouth we cover for bathroom resealing.
Work in PO2 works the same way as everywhere else we cover. Bathroom resealing is available to properties on Knox Road, Croft Road and Whaley Road and the roads around them. Tipner is on the M275 and A2047, which makes it straightforward to reach with everything needed for bathroom resealing. Other places close to Tipner include North End (1 mile east), Rudmore (1 mile south-east), Portsmouth (1 mile south-east), Landport (1 mile south) and Hilsea (1 mile north-east).
Around Tipner
Typical jobs here are in homes near St Edmund's Catholic School, Mother Shipton pub and Mayfield School. The closest station to Tipner is Portsmouth & Southsea station, about 1.4 miles south of the centre. A little further out are Charles Dickens Birthplace Museum (0.8 miles south) and Portchester Castle (1.8 miles north-west). Green spaces nearby include Milton Locks and Portsdown Hill.
Landlord and commercial work in Tipner
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What the job involves on each surface
Basins & vanity units
On a basin, neatness shows: the bead is right in front of you, so it’s tooled cleanly and evenly, finished in a colour that suits the basin.
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
Other services in Tipner
Why act early in Tipner
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. In a smaller place like Tipner, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why Tipner customers choose us
- Colour picked to suit the job
- 180+ five-star Google reviews
- Homes, businesses and hotels
- One-year guarantee on every job
Read our cost guide and our reviews.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep the fan on for a while after bathing
- Wipe up water along the back of the worktop
- Dry the bead with a towel now and then
- Wait for the cure time we give you
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Don’t wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Tipner questions
Do you cover Tipner for bathroom resealing?
Yes. Our work covers London and the South East, and Tipner is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
I let a flat near Portsmouth & Southsea station. Can you help?
Yes. We work for landlords and agents as well as householders. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
Are you fully insured?
Yes. Full insurance covers our work.
Do I need to be at home?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises. Working times can be discussed when we quote.
Do you reseal kitchen worktops and sinks too?
Yes. Worktops, sinks and splashbacks are all part of the job, with a sealant suited to kitchens, colour-matched where it shows.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
What affects the cost of bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Which sealant suits the joint
- The old material and how stubborn it is
- Access and height
- How many rooms, windows or areas are involved
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
- Pictures of the joints, sent by email
- The rough size of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
The process
At the end, we look at the finished work together and explain the cure time. The visit itself usually takes a couple of hours for a single bath or shower, depending on the amount of work. For a job in Tipner, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
- For business premises, tell us about site rules or sign-in
Get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.