Greater London · England
Gutter, fascia & soffit sealing in London, Greater London
Problem with your gutter and fascia joints in London? We cut out the old, prepare the joints and apply the right sealant.
- Wet patches on the wall under a gutter joint
- Dripping gutter ends
- Internal damp traced to a gutter joint
Common questions in London
I let a flat near Elephant & Castle station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
What guarantee comes with gutter sealing in London?
All our work, in London and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Do you work in London?
Yes. We are based in Crawley and work across South East England, London and Scotland, London included.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages.
Do you offer different sealant colours?
We’ll suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before resealing.
Gutter sealing in London, done properly
It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Sealing it is quick while the gutter is still sound. We work on gutter joints, soffit joints and uPVC fascias, and people most often call us about old gutter sealant that has let go and internal damp traced to a gutter joint.
A place the size of London has buildings of every age, from older brick terraces to modern blocks with rendered or clad walls. Modern walls depend on their movement joints; older houses depend on sound gutter and roofline joints.
All of our work is guaranteed for twelve months, in London and everywhere else we cover.
- Where
- London (CR0, E14, CR4, SW11)
- Wider area
- Greater London
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026

Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
What happens if it’s left?
Leaving a leaking end cap can send water down the wall all winter. It’s a small job to put right before the damage spreads. In a large rental market like London, tired sealant leads to tenant complaints about mould, damp and leaks. Sorting it between tenancies is easier than dealing with it mid-let.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why London clients choose us
- Colour agreed with you before any work starts
- Any old sealant cut out fully, not covered over
- Every job guaranteed for a year
- We leave the area clean and tidy
Read our cost guide or what customers say.
Looking after it afterwards
Aftercare is simple:
- Keep an eye out for wet patches below a joint
- Look along the fascias for open joints
- Watch for drips in a downpour
- Keep the gutters clear of debris
Check the joints after heavy rain. Drips are easiest to spot while it’s raining.
If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches inside.
What the job involves on each surface
Gutter end caps
We seal end caps from the inside where we can reach, after cleaning and drying.
Garage door frames
A fresh seal around the frame stops rain getting in.
When something else is needed
Before booking, it’s worth knowing the limits too:
- Downpipes that are blocked or broken
- Leaks from the roof rather than a joint
- Fascias that need replacing
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
Surfaces we seal
- Gutter end caps
- Garage door frames
- Roofline trims
- uPVC fascias
- Soffit joints
- Gutter joints
Walls and rooflines in London
Historic houses like Mansion House (about 1 mile north) are a reminder that the area around London has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you live in an older home near St George the Martyr, old and new materials meet at the roofline and walls, which is where sealant earns its keep. Managing a site like Charles Dickens Primary School? Then its movement joints, gutters and trims need looking after like any other building’s. Rented homes near Elephant & Castle station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
London is in Greater London. Whether you are in the middle of London or further out, we cover gutter sealing for every kind of property. We cover 764 towns and villages across Greater London, large and small.
Jobs for gutter sealing in CR0, E14, CR4 and SW11 is quoted and booked the same way as anywhere else. You will find streets such as Walcot Square, Surrey Square and Sutherland Square, all of which we cover. Being close to the A2 and A10, London is simple for us to get to for gutter sealing. We also cover Walworth (1 mile south), Bermondsey (1 mile east), Camberwell (2 miles south), South Bermondsey (2 miles south-east) and Surrey Canal (2 miles south-east). Further out, we also cover City of Westminster (3 miles west), Marylebone (3 miles north-west), Kensington (5 miles west), Walthamstow (7 miles north-east), Hampstead (5 miles north-west) and Ruislip (14 miles west). Being one of Greater London’s larger places, London has every kind of property, from flats to offices.
Landmarks near London
Locally, jobs take us to homes and businesses close to Newington Gardens, Trinity Arms Public House and London School of Musical Theatre and the streets around them. You’ll also find St Mary-at-Hill (0.9 miles north-east), Ark Globe Academy (within half a mile south) and The BFI Reuben Library (1 mile north-west). London has its own railway station: Elephant & Castle station. A little further out are Surrey Dispensary (under half a mile south-east) and Baynard's Castle (0.9 miles north). The countryside around London includes Bellenden Road Nature Garden and St. James's Park Lake.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Places near London
Other services in London
What happens on the day
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take an hour or two for a few joints, longer for a full run. Where a business in London needs to stay open, out-of-hours working can be arranged, and homes are booked within our usual hours, Monday to Saturday.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- The joints are checked once sealed.
How to prepare
- Let us know about stairs, lifts or work at height
- Mention any sign-in or site rules at work premises
- Move anything stored near the joints
Get a quote
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before work begins.
