Glasgow · Scotland
Bathroom & kitchen resealing in Temple, Glasgow
Specialist bathroom resealing for Temple: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Black mould in the silicone that will not clean off
- Lumpy, uneven sealant from a DIY attempt
- Splits where the tray meets the wall
Bathroom resealing in Temple, done properly
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. We work on shower trays & enclosures, basins & vanity units and baths, and the jobs we see most are leaks into the floor or ceiling below and water escaping at the shower enclosure.
Tenement flats are common in all four of Scotland’s big cities, alongside houses and newer flats. With flats above and below, a leak from a tired seal can reach the flat underneath.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Temple (G13, G12, G61)
- Wider area
- Glasgow
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Surface by surface
Basins & vanity units
On a basin, neatness shows: the bead is right in front of you, so it’s tooled cleanly and evenly, finished in a colour that suits the basin.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. Proper degreasing is what helps the new joint last.
What we can’t put right
In fairness, there are a few things sealant won’t fix:
- Cracked or missing grout between tiles (that is regrouting)
- Movement from a bath with loose feet or no proper support
- Cracks in the tray itself rather than the joint
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.
Surfaces we seal
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Basins & vanity units
- Shower trays & enclosures
- Baths
What bathroom resealing looks like in Temple
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Sandstone tenements are a big part of Glasgow’s housing, so many bathrooms sit right above a neighbour’s ceiling.
For site and facilities teams at buildings such as Knightswood Secondary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Anniesland station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Temple is about 3 miles north-east of Renfrew, in Glasgow. We provide bathroom resealing to homes and businesses in Temple. We cover 183 towns and villages across Glasgow.
All of G13, G12 and G61 is within our area for bathroom resealing. Local streets include Fern Lane, Ilay Road and Ryvra Road. With the A82 close by, Temple is easy for our applicators to reach for bathroom resealing. Nearby, we also carry out bathroom resealing in Anniesland Cross (1 mile south), Anniesland (1 mile south-west), Netherton (1 mile north), Knightswood (1 mile west) and Kelvindale (1 mile east). Within a short drive, we also cover Glasgow (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (5 miles south-east), Blythswood Hill (3 miles south-east) and Langside (5 miles south).
Near you in Temple
In Temple, that means homes and buildings near Glasgow University Library, Jordanhill College and Lock 27 pub, among other places. There’s a railway station in Temple itself: Anniesland station. A little further out are Glasgow Museum of Transport (2.1 miles south-east) and Partick Castle (1.9 miles south-east). Green spaces nearby include Kilmardinny and Castle Hill.
What we do, step by step
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take two to three hours for a typical bath, depending on how much old sealant there is. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. For a job in Temple, tell us the floor, how the door entry system works and where we can park nearby.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Clear items away from the joints we are working on
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
Get a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Related advice
What affects the quote in Temple
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- The type of sealant required
- Any mould that needs treating
- The size of the job
- How easy the joints are to reach
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Asking for a quote
What to tell us when you ask for a quote:
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- Where the job is, and your postcode
- Roughly how big the job is
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Keeping the joints in good condition
Aftercare is simple:
- Wipe up water along the back of the worktop
- Wait for the cure time we give you
- Stick to a soft cloth and a mild cleaner
- Open a window or run the fan so the room dries
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Catching it early keeps it a simple reseal.
FAQs for Temple
Do you work in hotels near Temple?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Can you help a landlord with a rental near Anniesland station?
Yes, we work for landlords and letting agents. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will give you a clear price.
Do you come to Temple?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Temple and the rest of Glasgow, along with the rest of our area.
Can I choose the colour of the sealant?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
How long will the resealing take?
It takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. We will confirm how long your job needs when we quote.
How long before the new sealant can get wet?
After around 24 hours in most cases. You will get the exact cure time before we leave.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
Signs you need bathroom resealing in Temple
A bath shifts a little every time it’s filled and emptied. Acrylic in particular gives slightly under the weight of water and a person, and a tray that isn’t fully bedded can rock. Over time the joint tears or pulls away from the tile.
Signs it’s time to call us include:
- A bead that has pulled away from the tiles
- Leaking joints on a shower screen
- Water getting behind the bath panel
- Lumpy, uneven sealant from a DIY attempt
If you live in an older home near All Saints Church, walls and floors in older homes can move, and sealant and grout show it first.
Before you book anyone
- Whether the sealant suits the joint
- What the cure time is
- How the joint is cleaned and prepared
- Are they insured?
Why deal with it now?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. For landlords in Temple, damp and leaks can be a Repairing Standard issue, so failed sealant is best replaced before it becomes a complaint.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
Why us?
- Full insurance on every job
- Experience in homes, commercial sites and hotels
- White, clear, grey or another colour, product permitting
- ARBOMaster approved applicator
Take a look at how sealant jobs are priced and customer reviews.